• WSM (WIRELESS SYSTEMS MANAGER)
  • Important information
  • Compatible Sennheiser products
  • System requirements
• GETTING STARTED/SETTING UP
  • Putting the system in operation
    • Installing the WSM software
    • Configuring the network
    • Launching the WSM software
    • Setting the language
    • Using several WSM software in a network
  • The operator interface of WSM
    • Main window
    • Overview of menus
    • Layout of the panel
  • Configuring the system in Offline mode
    • Creating a new configuration
    • Pre-configuring device parameters
    • Transferring the configuration to the devices
• WORKING WITH THE SOFTWARE
  • Updating the firmware of devices
    • Displaying the firmware versions of the devices
    • Downloading the latest firmware update from the Internet
    • Preparing the firmware update
  • Frequency management
  • “Easy Setup” frequency management
    • Monitoring system
    • Microphone system
    • Defining, adding and exporting new frequency ranges for stationary devices
  • “Professional Setup” frequency management
    • Launching the “Professional Setup” frequency management
    • Overview of the “Professional Setup” window
    • The tabs
    • Devices
    • Frequencies/bands
    • System Regions
    • Spare Groups
    • Coordination
    • Allocation
    • Markers
    • Loading the regional frequency grid, performing a frequency scan and analyzing the frequency spectrum
  • Working with scenes
    • Master Scene
    • Adding new scenes
    • Selecting a scene
    • Renaming a scene
    • Copying and pasting scenes
    • Deleting a scene
    • Scene commentary (label)
  • Working with panels
    • Creating panels
    • Enlarging/reducing panels
    • Selecting several panels
    • Changing the graphical representation of panels
    • Aligning and moving panels
    • Adding a panel to a different scene
    • Sorting panels for multi-channel systems
    • Identifying channels
    • Panel commentary (label)
    • Deleting panels
  • Configuring devices
    • Configuring streaming
    • Setting parameters in the “Properties” window
  • Recording the field strength using the tools
    • The “RF Spectrum Analyzer” tool
    • The “RF Level Recorder” tool
    • Working with the tools
    • Setting the frequencies – “RF Spectrum Analyzer” only
    • Overview of the buttons of the tools
    • Starting the field strength recording
    • Interrupting the field strength recording
    • Canceling the field strength recording
    • Deleting the last field strength recording
    • Zooming the “RF Level” window in/out
    • Temporarily saving recordings and comparing them
    • Marking measured values and commenting on them
    • Finding minimum and maximum values
    • Saving recording data
    • Loading previously saved recording data
    • Printing recording data
• TROUBLESHOOTING
  • Frequently asked questions
  • If a problem occurs
    • Hardware
    • Software
  • Glossary
• CONTACT

►

CONTACT