Synchronizing devices
You can synchronize ew 100 P G4 series transmitters and receivers via the receiver’s infrared interface.
To synchronize the devices:
Switch the transmitter and the receiver on.Call up the Sync menu item on the receiver. Sync appears in the receiver’s display.
Hold the infra-red interface of the transmitter in front of the infra-red interface of the receiver. The parameters are transferred to the transmitter. When the transfer is complete, a tick appears in the receiver’s display as a confirmation. Then the receiver will return to the current standard display.
► 
To cancel synchronization:
Press the ON/OFF button on the receiver. An X appears in the display.
This icon also appears when:
• no transmitter is found or the transmitter is not compatible.
• no transmitter is found and the synchronization process automatically ends after 30 seconds.