Home
User manual
Information on handling, operation, user interface and application scenarios.
Operating instructions
The following chapters contain additional information on operating the Profile Wireless.
Start/stop/mute recording

User manual
Information on handling, operation, user interface and application scenarios.
- Putting the unit into operation
  This chapter describes the initial configuration and commissioning of the Profile Wireless.
- Operating instructions
  The following chapters contain additional information on operating the Profile Wireless.
  - Outputting audio signals
    The receiver has two unbalanced 3.5 mm audio outputs.
  - Start/stop/mute recording
  - Displays on the receiver’s display panel
    Status information such as recording mode, signal strength, battery status and audio level is shown on the display.
  - Operating the receiver
    The receiver’s display is divided into three areas for the receiver and the two transmitters. The different menu items can be opened and settings can be made using different swiping movements. The receiver is operated using the navigation principle shown below.
  - Accessing the receiver menu, navigating through menu items and making settings
    In this menu, you can make settings for the subitems Mode, Headphones, Output Level, Backup Recording, Brightness, Pairing, Rotate Display, Date, Time, Reset and Info. A complete overview of the menu can be found here: Receiver menu structure
  - Receiver menu structure
  - Accessing the transmitter menu, navigating through menu items and making settings
    In this menu, you can make settings for the subitems Recording, Mute, Gain, Low Cut, LED Lights and Memory. A complete overview of the menu can be found here: Transmitter menu structure
  - Transmitter menu structure
  - Receiver output modes
    The receiver has three different modes (mono, stereo and safety) that can be set to optimally adjust all parameters to the respective recording situation and make your work easier.
  - Adjusting the transmitter gain
    The sensitivity of the transmitter microphones can be adjusted using the gain control. It can be set on the transmitter itself, provided the transmitter is not connected to the receiver. When the transmitter is connected, this feature is disabled and controlled by the receiver.
  - Pairing the transmitter and receiver
    The two transmitters are delivered pre-paired with the receiver. If you do not automatically connect to the receiver when you turn it on, you can manually activate the pairing mode of both devices to re-establish the connection.
  - Meaning of the LEDs on the transmitter
  - Installing updates or performing a reset
  - Attaching the transmitter to clothing
    The transmitter can be attached by clip or magnet, depending on the nature of the clothing.
  - Using the Profile Wireless as a handheld or table microphone
    Depending on the recording situation, the Profile Wireless can be used as a handheld microphone or as a table microphone on a tripod.
- Cleaning and maintenance
  Note the following information when cleaning and maintaining the product.
- Transport
  This chapter contains information on the proper transport of the Profile Wireless.

Start/stop/mute recording

To start/stop a recording via the transmitter:

Briefly press the REC button on the side of the transmitter.
Recording is started/stopped.

To start/stop a recording via the receiver:

Double-tap one of the transmitter fields on the receiver’s display.
Recording is started/stopped. An active recording is indicated by red icons in the transmitter fields.

To mute a transmitter:

Press the REC button to mute or enable the audio signal.
Alternatively, the transmitters can also be muted using the corresponding menu on the receiver. See Accessing the transmitter menu, navigating through menu items and making settings.
The transmitter is muted or enabled.