Home
Installation and startup
Instructional chapters on mounting and configuring the device
General notes

Installation and startup
Instructional chapters on mounting and configuring the device
- General notes
- Variant 1: installed flush in a dropped/coffered ceiling
  The TeamConnect Ceiling Medium can easily be installed flush in dropped or closed ceilings.
- Variant 2: mounted directly below the ceiling
  For installation directly below the ceiling, you need the TCC M-S-W or TCC M-S-B product variant, or the TCC M-H-W or TCC M-H-B ceiling microphone housing.
- Variant 3: suspended from the ceiling
  For suspended mounting, you need the TCC M-SK ceiling suspension kit.
- Mounting the TeamConnect Ceiling Medium on a VESA mount
  The TeamConnect Ceiling Medium can be mounted on standard VESA MIS D mounts.
- Configuring the TeamConnect Ceiling Medium with the Sennheiser Control Cockpit
- Configuring the TeamConnect Ceiling Medium with a media control system
  After initial configuration with the Sennheiser Control Cockpit, the TeamConnect Ceiling Medium can also be operated using a media control system.

General notes

Drilling template

Use the drilling template (item no. 594561) included with delivery to draw the drill holes and the circumference of the device.

Camera orientation

Make sure that the microphone is aligned before mounting. This is indicated by the “0°” mark.

Replacing the logo plate

If you want to replace the logo plate on the front of the microphone:

Push the side of the plate so that it tilts out.
Remove the plate from the housing.
Insert the new plate. The magnet will hold it in place.