Home
Planning and installation
Information about connecting to a network, audio output and installation planning
Outputting analog audio signals
Use the Analog Out socket to output analog audio signals.

Planning and installation
Information about connecting to a network, audio output and installation planning
- Connecting to a network
- Outputting analog audio signals
  Use the Analog Out socket to output analog audio signals.
- Outputting digital audio signals
  The Dante interface with two RJ-45 sockets is used for outputting digital audio signals. The interface supports redundant output and series connection of multiple ceiling microphones (switched mode). The mode is configured using the Dante Domain Manager or Dante Controller from Audinate (www.audinate.com).
- Planning the installation

Outputting analog audio signals

Use the Analog Out socket to output analog audio signals.

*The analog audio cable is not included with delivery. Depending on the audio input of your DSP, the cable must connect 3-pin terminal to 3-pin XLR terminal or to jack.

Outputting analog audio signals

Variant 1: output analog audio signal to a DSP

Variant 2: output analog audio signal to video conference codec

Variant 3: output analog audio signal from multiple ceiling microphones to a single DSP