Home
Planning and installation
Information about connecting to a network, audio output and installation planning
Outputting digital audio signals
The Dante interface with two RJ-45 sockets is used for outputting digital audio signals. The interface supports redundant output and series connection of multiple ceiling microphones (switched mode). The mode is configured using the Dante Domain Manager or Dante Controller from Audinate (www.audinate.com).

Planning and installation
Information about connecting to a network, audio output and installation planning
- Connecting to a network
- Outputting analog audio signals
  Use the Analog Out socket to output analog audio signals.
- Outputting digital audio signals
  The Dante interface with two RJ-45 sockets is used for outputting digital audio signals. The interface supports redundant output and series connection of multiple ceiling microphones (switched mode). The mode is configured using the Dante Domain Manager or Dante Controller from Audinate (www.audinate.com).
- Planning the installation

Outputting digital audio signals

The Dante interface with two RJ-45 sockets is used for outputting digital audio signals. The interface supports redundant output and series connection of multiple ceiling microphones (switched mode). The mode is configured using the Dante Domain Manager or Dante Controller from Audinate (www.audinate.com).

Outputting digital audio signals

Variant 1: output digital audio signal to one Dante network

Variant 2: output digital audio signals from multiple ceiling microphones connected in series to one Dante network