Factory reset
Resetting the ConnectStation via Admin Interface
To reset the ConnectStation to factory settings:
Connect your computer to LAN3 of the ConnectStation.
Open a browser and navigate to
192.168.0.10.
Login with your user credentials.
In the
Update & Reset tab click on
Perform reset now.
The ConnectStation will be reset to factory settings.
Resetting the ConnectStation via USB keyboard
To reset the ConnectStation via USB keyboard:
Connect the access point to the ConnectStation.
Power up both the ConnectStation and the access point.
Wait until the system is ready (2-3 min).
Connect a USB keyboard to one of the USB sockets of the ConnectStation.
Type
reset and press
Enter.
The ConnectStation and the access point will be reset to factory settings.
Log into the admin interface with the default login details:
• Username: admin
• Password: sennheiser
If the admin interface shows that the access point is not getting connected, a hard reset of the access point has to be performed. See below:
"Resetting the access point").
Resetting the access point
To reset the access point Ruckus ZoneFlex 7372 to factory settings:
Disconnect the access point from its power supply.
Press and hold the RST (reset) button of the access point.
Insert the power supply into the access point while holding the RST button.
Hold the RST button for approximately 15 seconds.
The access point will be reset to factory settings.