• Search via IR: Detects the transmitter via the infra-red interface

• List: Selects a transmitter from the list

• Scan to next: Automatically searches a suitable frequency on the basis of the Squelch setting

• Tune: Manually sets the frequency

• License: Selects a frequency preset

• Transfers the frequency to the transmitter using the infra-red interface; see „Performing a synchronization (Sync)“

• inactive: Pilot tone evaluation is deactivated

• active: Pilot tone evaluation is activated

• not supported: Transmitter does not support the pilot tone function

• Analog reception: Adjusts the squelch threshold

• Digital reception: inactive

• always ON: Audio output is always activated

• ON by command: Audio output can be activated via the command function

• MUTE by command: Audio output can be muted via the command function

• inactive: Audio signal is muted at all output sockets and only active at the headphone output

• active: Audio signal is active at all output sockets

• Digital AES-3 or analog

• Digital reception: digital

• Analog reception: Adjusts the audio level

• Adjusts the audio level

• on or off

• Adjusts the headphone volume

• Routes the signal of the receiving channel CH1 or CH2 or CH1+CH2 to the headphone output

• Stores the current settings as a scene

• Changes the IP address of the receiver

• Displays the firmware version and the word clock status

• Displays licensed frequencies

• Performs a frequency scan